본문 바로가기
읽기 · 학술 · 공개 라이선스 원문

Perspectives on improving photosynthesis to increase crop yield

Croce, Carmo-Silva, Cho, Ermakova, Harbinson, Lawson et al. · 2024

공개 학술지 The Plant Cell 에 실린 총설 논문입니다(2024년). CC BY 4.0 으로 공개된 글이고, 그림 · 표 · 참고 문헌 표시를 뺀 본문을 실었습니다.

출처 Croce et al. (2024), The Plant Cell · 라이선스 CC BY 4.0 · 원문

장 8개 올림 이 장 2135낱말
← 앞 장 다음 장 →

이 장은 원문만 있습니다. 문장별 해석은 앞 장부터 차례로 붙입니다.

4장 · Perspectives on improving photosynthesis to increase crop yield — Remarkable, integrated, and complex: paths to improving Rubisco in crops

By Elizabete Carmo-Silva

Rubisco is imperfect yet unique and remarkable (Badger and Sharwood 2023). It catalyzes a rather complex set of reactions during the carboxylation of RuBP and can react with O2 rather than CO2, leading to oxygenation of the sugar phosphate substrate. It is the only carboxylase that uses substrates and products that are part of central plant metabolism and that is compatible with the CBB cycle (reviewed by Prywes et al. 2023b). Consequently, Rubisco is responsible for assimilating carbon from atmospheric CO2 into sugars, thereby enabling life on Earth. Rubisco's imperfections have been a research subject and a target for improvement since its discovery (Sharkey 2023). Because the enzyme carboxylates RuBP at relatively slow rates, plants invest large amounts of resources (especially nitrogen and carbon skeletons) into making Rubisco in sufficiently high abundance in the leaves of crop plants to support adequate rates of photosynthetic CO2 assimilation and plant growth (Carmo-Silva et al. 2015). The biogenesis of Rubisco, consisting of synthesis and assembly into the hexadecameric L8S8 form present in plants, is itself dependent on several ancillary proteins (Bracher et al. 2017), adding further demand on agricultural inputs and impacting resource use efficiency. Thus, while adequate abundance of Rubisco is a necessary consideration in strategies aimed at improving photosynthesis, it needs to be balanced with ensuring efficient use of resources to be compatible with sustainable agricultural practices.

Rubisco catalytic diversity investigations led to the suggestion that tradeoffs associated with the complex reaction mechanism limit the scope for Rubisco improvement (Tcherkez et al. 2006; Savir et al. 2010). A recent phylogenetic analysis demonstrated that, despite being among the 1% slowest evolving enzymes, the continual evolution of Rubisco was associated with improved catalytic efficiency and with greater leaf-level CO2 assimilation and photosynthetic nitrogen use efficiency (NUE) in C3 plants (Bouvier et al. 2024). Excitingly, a deep mutational scan using a Rubisco-dependent Escherichia coli strain revealed that several highly conserved residues of the loop 6, which folds over the catalytic site and is involved in substrate binding and catalysis, can be mutated without impacting catalysis, suggesting it is possible to target combinations of these residues for future Rubisco engineering efforts (Prywes et al. 2023a).

Rubisco catalytic sites are located at the interface between two large subunits (RbcL), and thus, RbcL has been considered the main source of catalytic diversity and the primary target for engineering efforts (Sharwood 2017). However, despite being far from the catalytic site, just a few changes in the Rubisco small subunit (RbcS) sequence can alter Rubisco catalytic properties (Lin et al. 2022). The role of RbcS in determining the abundance of Rubisco in leaves and adjusting catalytic efficiency has been recently reviewed by Mao et al. (2023) who highlighted the rise of RbcS as a target for improvement that is increasingly tractable as engineering approaches become more robust and widely applicable. Replacement of a crop plant Rubisco by a superior version such as that found in rhodophytes (Oh et al. 2023b) is exciting yet challenging given the need to express adequate levels of RbcS, RbcL, and compatible ancillary proteins. A more straightforward solution might be the use of fast-developing gene editing technologies to mutate specific residues required for enhanced catalysis, when we know what these are.

While the abundance and catalytic properties of Rubisco determine the maximum rate of carboxylation for a given leaf, the activity of Rubisco in crops is regulated by interaction with Rubisco activase (Rca), posttranslational modifications, and the chloroplast stroma environment, which can change rapidly in response to dynamic environmental conditions surrounding the leaf (Amaral et al. 2024). Under fluctuating light conditions, for example, photochemical, biochemical (including Rubisco regulation), and/or diffusional limitations can affect the efficiency of photosynthesis depending on the duration, frequency, and intensity of shade and full sun periods (Long et al. 2022).

Rca is a molecular chaperone that couples ATP hydrolysis with conformational remodeling of inhibited Rubisco catalytic sites, releasing sugar phosphate derivatives that occur naturally and bind tightly and unproductively to the enzyme (Bhat et al. 2017b; Mueller-Cajar 2017). Rca is itself regulated by the redox status, ATP, and Mg2+ availability in the chloroplast stroma, and some Rca isoforms activate Rubisco more efficiently under fluctuating light (Carmo-Silva and Salvucci 2013). The chaperone is thermolabile, and its ability to restore Rubisco activity is impacted at moderately high temperatures. Progress in understanding the mechanism of Rubisco activation by Rca (Hazra et al. 2015; Bhat et al. 2017a; Flecken et al. 2020) and identification of more thermostable and more efficient Rca isoforms suggest that improvement in Rubisco regulation to maximize carboxylation in current and future warmer climates is possible (Qu et al. 2023; Sparrow-Muñoz et al. 2023; Amaral et al. 2024). Significant unknowns exist in our understanding of Rubisco regulation by Rca, PTMs, and the chloroplast environment (Amaral et al. 2024) and the role of sugar phosphate derivatives and their phosphatases (Orr et al. 2023). Addressing these will aid identification of successful strategies for improving Rubisco, for sustainably increasing crop productivity and climate resilience.

Importantly, to maximize impact, any approach to improve photosynthesis should be considered holistically, and stacking of improvements in various reactions and sub-processes of photosynthesis will be required to ensure that other processes do not become limiting. For example, chloroplast electron transport is also sensitive to heat stress and has been shown to co-limit photosynthesis alongside Rubisco activation (Scafaro et al. 2023). Optimizing Rubisco activity in crop plants requires consideration of Rubisco abundance, Rubisco catalytic properties, and regulation of its activity (Fig. 6A), as well as how Rubisco activity interacts and is coordinated with other plant processes (Fig. 6B). The interaction with the regeneration of RuBP in the CBB cycle is most obvious, but abundance and properties of Rubisco should take into consideration integration with central and specialized metabolism, as well as the specific crop canopy architecture, the needs of the leaves at various canopy layers throughout crop development, and the remobilization of N and C skeletons stored in Rubisco into the crop product to be harvested.

Introducing CCMs into plants

By Alistair J. McCormick

The growth of many photosynthetic organisms, including most crops, is limited by the slow rate of CO2 assimilation by Rubisco and competition with O2 at the active site resulting in energetically wasteful photorespiration (Bauwe 2023). In response to the shortcomings of Rubisco, nearly every photosynthetic clade has evolved CCMs to supply Rubisco with concentrated CO2 and preferentially drive CO2 assimilation over photorespiration. CCMs can be broadly divided into two categories based on biophysical or biochemical processes. Biochemical CCMs initially capture CO2 as an organic metabolite before re-conversion to CO2 near Rubisco and include eukaryotic species that perform C4, C2, and crassulacean acid metabolism (CAM) photosynthesis (Lundgren 2020; Schiller and Bräutigam 2021; Furbank et al. 2023). Biophysical CCMs channel or actively pump in inorganic carbon (Ci, i.e. CO2 and HCO3−) to increase the intracellular Ci pool and include prokaryotic autotrophs, eukaryotic algae, hornworts, and seagrasses (Capó-Bauçà et al. 2022; He et al. 2023; Lafferty et al. 2023; Nguyen et al. 2023). All cyanobacteria and some chemoautotrophic bacteria sequester Rubisco within proteinaceous shells called carboxysomes, while almost all algae and some hornworts condense Rubisco into a micro-compartment called the pyrenoid. Both carboxysomes and pyrenoids are supplied with HCO3− that is rapidly dehydrated by localized carbonic anhydrase (CA) activity to facilitate CO2 enrichment at the active sites of Rubisco.

The introduction of biochemical or biophysical CCMs into C3 crops is considered a high-risk high-gain engineering strategy to enhance crop yields and resilience (Fig. 7). Models have estimated that the theoretical gains in source leaf photosynthetic efficiency range from 30% to 60%, some of the largest improvements predicted for an engineering approach (Long et al. 2019). Although the levels of translation of such improvements into productivity are debated, for example, the importance of also considering sink demand to take full advantage of source enhancements (Paul 2021), a recent conservative model has predicted an 8% increase in wheat yields, specifically for successful introduction of the cyanobacterial CCM (Wu et al. 2023). Nevertheless, re-constituting any functional CCM in a C3 plant remains a complex endeavor, and engineering each CCM type is beset by specific challenges. In general, advances in our mechanistic understanding of different CCMs have proceeded in parallel with ongoing engineering efforts in a design build test learn (DBTL)-like cycle.

Research efforts to introduce biochemical CCMs into C3 plants have largely concentrated on engineering the C4 pathway. The C4 pathway is estimated to increase CO2 levels around Rubisco up to 10-fold above ambient (von Caemmerer and Furbank 2016), which provides C4 crops (e.g. maize and sugarcane) with increased photosynthetic efficiencies, growth rates, and in some cases higher water use efficiencies compared to C3 crops. Much of this work has been driven by the C4 rice project (Furbank et al. 2023), which has focused on introducing the specialized anatomical and biochemical traits of the model C4 crop maize into rice. Thus, C4 engineers have faced two complex challenges: construction of a “Kranz-like” C4 leaf anatomy with reduced vein spacing and increased organization between mesophyll and BSCs, and biochemical re-regulation for appropriate levels of cell-specific protein expression, for example, sequestration of Rubisco in the bundle sheath chloroplasts. Although the factors involved in the development of the Kranz anatomy are still not fully understood, advances in engineering biology have led to exciting progress in reconstituting C4 biochemistry in rice. This includes the generation and application of leaf cell-specific expression systems, such that several key C4 proteins can now be co-expressed and appropriately localized in rice from a single construct (Ermakova et al. 2021a). Attention is now also being expanded to the engineering potential of CAM and C2 pathways (Lundgren 2020; Schiller and Bräutigam 2021). The CAM pathway could facilitate increased drought tolerance, while C2 engineering offers some of the benefits of the C4 pathway with fewer anatomical modifications.

The most efficient biophysical CCMs are carboxysome-based CCMs (cCCMs) and pyrenoid-based CCMs (pCCMs), which can enhance CO2 concentrations around Rubisco by up to 1,000-fold and 40-fold, respectively (Price et al. 2013; Fei et al. 2022). Biophysical CCMs also function within a single cell, so transfer to C3 leaf mesophyll cells may be potentially simpler compared to introducing the C4 pathway. cCCMs have been consistently predicted to increase yield gains in C3 crops (Nguyen et al. 2023), in part because cyanobacteria have the fastest known form I Rubiscos, with carboxylation turnover rates (kcat) up to five times higher than C3 species (Ang et al. 2023). To date, good progress has been made in understanding the components involved in carboxysome assembly and in reconstructing α- and β-carboxysomes in plants (Borden and Savage 2022; Blikstad et al. 2023). Recently, Chen et al. (2023) reconstructed the α-carboxysome from the chemoautotroph Halothiobacillus neapolitanus in tobacco chloroplasts, which contained active heterologous Rubisco and CA enzymes. However, functional cCCMs in bacteria still require active uptake of HCO3− and CA activity restricted to carboxysome (Price et al. 2013). Thus, testing whether carboxysomes can enhance growth in plants will require the removal of native chloroplastic CA activity and the introduction of functional HCO3− transporters on the chloroplast envelope. Although the latter remains a long-standing challenge, new screening tools to test the functionality of active HCO3− transporters and channels in planta could help to make progress in this area (Förster et al. 2023).

pCCMs are exclusively found in eukaryotes and are likely the most globally abundant CCM type. Pyrenoids are much larger than carboxysomes and characterized by highly diverse morphologies (Barrett et al. 2021), suggesting that there are many ways to achieve pyrenoid formation. The pCCM is best understood in the model alga Chlamydomonas reinhardtii, whose pyrenoid is characterized by three architectural features: a liquid-like phase-separated matrix of condensed Rubisco, pyrenoid tubules derived from thylakoid membranes that traverse the matrix to supply Ci, and a sheath of starch around the matrix that acts as a CO2 diffusion barrier (Ang et al. 2023; He et al. 2023). Modeling predicts that building a functional Chlamydomonas pCCM in a C3 plant chloroplast could increase CO2 assimilation rates by up to 3-fold (Fei et al. 2022). pCCMs do not offer the high carboxylation efficiencies of cCCMs but might be more readily plant-compatible based on the appropriate localization of pCCM components thus far expressed (Adler et al. 2022). Furthermore, pCCMs do not require the removal of chloroplastic CA activity and do not need active HCO3− transport, at least at ambient CO2 levels (Fei et al. 2022). To date, Rubisco condensation into a “proto-pyrenoid” matrix has been achieved in Arabidopsis (Atkinson et al. 2020), with work ongoing to reconstitute the two remaining architectural features. Excitingly, recent work in diatoms and hornworts shows that a variety of solutions may exist to achieve a functional pCCM in plants (Lafferty et al. 2023; Nam et al. 2023; Oh et al. 2023a), for example, by employing a pyrenoid protein shell instead of a starch sheath. Future work could involve creative synthetic strategies that draw from aspects of all CCMs, such as prokaryotic HCO3− transporters coupled to pyrenoids, or a biochemical C4 pathway localized within a single mesophyll cell (MC) where decarboxylation occurs in a modified chloroplastic carboxysome rather than the BS.

이 글은 위 출처의 원문을 그 라이선스(CC BY 4.0)에 따라 옮겼습니다. 참고문헌 목록과 인용 번호, 그림 · 표 · 각주 · 수식 · 부록은 빼고 절별로 나누어 실었으며, 그 밖의 문장은 원문 그대로입니다. 원 저작자와 발행 기관은 이 화면을 만들거나 검토하지 않았고, 이곳의 해석과 낱말 풀이는 공식 번역이 아닙니다.